Savana 3/4 Ton Van V8-6.5L DSL Turbo VIN F (2001)
Fog/Driving Lamp Bulb: Service and Repair
Fog Lamp Bulb Replacement - Rear
REMOVAL PROCEDURE
1. Remove the screws retaining the lens to the lamp assembly.
2. Remove the lens from the lamp assembly.
3. Gently push in on the bulb and turn the bulb 1/4 turn counterclockwise.
4. Remove the bulb from the socket.
INSTALLATION PROCEDURE
1. Install the bulb to the socket.
2. Gently push in on the bulb and turn the bulb 1/4 turn clockwise.
3. Install the lens to the lamp assembly.
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the screws in order to retain the lens to the lamp assembly.
Tighten
Tighten the screws to 1.5 N.m (13 lb in).
