2001 Savana EBCM Service and Repair - V8 Diesel Turbo
5. Remove the EHCU from the frame allowing enough clearance to access the EBCM.
6. Remove the T-25 Torx(R) bolts (1) that fasten the EBCM to the BPMV.
Remove the EBCM(2) from the BPMV(4). Removal may require a light amount of force.
Important: Do not use a tool to pry the EBCM or the BPMV.
7. Clean the BPMV with a clean, dry cloth.
Installation Procedure
Important:
^
If the EBCM mounting bolts are corroded or damaged, do not reuse the old mounting bolts. Install new EBCM mounting bolts with the new
EBCM.
^
Do not use RTV or any other type of sealant on the EBCM gasket or mating surfaces.