Savana 3/4 Ton Van V8-6.5L DSL Turbo VIN F (2001)
6. Disconnect the reservoir outlet hose (3) from the power steering pump.
7. Cap the ends of the hose and the pump in order to prevent the entrance of dirt.
8. Remove the pump drive belt. Install a 3/8 inch drive ratchet on the tensioner arm and rotate the arm counterclockwise.
9. Using the J 25034-C remove the power steering pump pulley from the vehicle.
10. Remove the power steering pump mounting bolts (1,3) from the vehicle.
11. Remove the power steering pump from the vehicle.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.