Savana 3/4 Ton Van V8-6.5L DSL Turbo VIN F (2001)
Stabilizer Link: Service and Repair
Stabilizer Shaft Link Replacement
Removal Procedure
Caution: Refer to Vehicle Lifting Caution in Service Precautions.
1. Raise the vehicle.
Caution: Refer to Caution Floor Jack in Service Precautions.
2. Support the vehicle with suitable safety stands.
Important: When you remove parts from the right side and the left side of the vehicle, keep the parts separated.
3. Remove the nuts from the link bolt spacer assembly.
4. Remove the link bolts.
5. Remove the spacer assemblies.
Installation Procedure
1. Install the spacer assemblies.
2. Install the link bolt assemblies.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the nuts.
^
Tighten the link bolt spacer assembly retaining nut to 18 Nm (13 ft. lbs.).
4. Remove the safety stands.
5. Lower the vehicle.
