Savana 3/4 Ton Van V8-6.5L DSL Turbo VIN F (2001)
Suspension Strut / Shock Absorber: Service and Repair
Front Suspension
Shock Absorber Replacement
Shock Absorber Replacement
Removal Procedure
Notice: The front shock absorbers of the vehicle are multifunctional. In addition to contributing to a smooth ride they also provide the only stop to the
front suspension when fully extended. Therefore, when servicing the shock absorber, service replacement shock absorbers must be equivalent to
original shock absorbers in both extended length and strength. Use of shocks not complying to original equipment or strength could result in
suspension over-travel or shock breakage. Suspension over-travel may result in suspension component breakage.
1. Raise the vehicle. Support the vehicle with suitable safety stands.
2. Install a jackstand under the lower control arm in order to relieve any tension on the shock absorber.
3. Remove the upper shock nut. Hold the shock absorber stem with a wrench while backing the nut off.
4. Remove the retainer.
5. Remove the grommet.
