Savana 3/4 Ton Van V8-6.5L DSL Turbo VIN F (2001)
23. If using the short method, cut the tip of the applicator nozzle in order to provide a bead of 6.0 mm (1/4 in).
24. If using the extended method, cut the applicator nozzle in order to provide a bead 10.5 mm (0.14 in) wide and 10.5 mm (0.14 in) high.
25. Use a cartridge type caulking gun to apply a smooth, continuous bead of urethane adhesive.
26. When using the short method, apply the urethane adhesive to the existing bead of urethane adhesive on the body.
27. When using the extended method, use the edge of the stationary window or the inside edge of the reveal molding as a guide for the nozzle in order
to apply the urethane adhesive (2) to the inner surface of the stationary window (3).
