Savana 3/4 Ton Van AWD V8-5.3L VIN T (2003)
Front Fender Liner: Service and Repair
Splash Shield Replacement - Wheelhouse
Removal Procedure
1. Remove the push pin retainers (1) retaining the splash shield (3) to the wheelhouse.
2. Remove the bolt (2) retaining the splash shield (3) to the wheelhouse.
3. Remove the splash shield (3) from the wheelhouse.
Installation Procedure
1. Install the splash shields (3) to the wheelhouse.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the bolt (2) in order to retain the splash shield (3) to the wheelhouse.
Tighten the bolt to 4 N.m (36 lb in).
3. Install the push pin retainers (1) in order to retain the splash shield (3) to the wheelhouse.
