Savana 3/4 Ton Van AWD V8-5.3L VIN T (2003)
Trim Panel: Service and Repair
Garnish Molding Replacement - Body Side Rear Upper
Garnish Molding Replacement - Body Side Rear Upper
Removal Procedure
1. Remove the upper pillar garnish molding. Refer to Garnish Molding Replacement - Upper Pillar (See: Garnish Molding Replacement - Upper
Pillar) .
2. Grasp and pull the upper pillar garnish molding away from the body in order to release the clips.
3. Remove the upper pillar garnish molding from the vehicle.
4. Inspect the front door upper pillar garnish molding for broken or missing clips.
Installation Procedure
1. Align the upper pillar garnish molding retainers to the body.
2. Push the upper pillar garnish molding towards the body to engage the clips.
3. Install the upper pillar garnish molding. Refer to Garnish Molding Replacement - Upper Pillar (See: Garnish Molding Replacement - Upper Pillar
) .