Savana 3/4 Ton Van AWD V8-5.3L VIN T (2003)
6. Connect the rear axle vent hose clip to the cable (1500 Series).
7. Pass the cable through the cable guide.
8. For cutaway vehicles, install the cable to the mounting bracket until the locking tabs snap into place.
9. For cargo and passenger vehicles, install the cable to the rear crossmember until the locking tabs snap into place.
10. Connect the cable to the equalizer.
11. Remove the safety stands.
12. Lower the vehicle.
13. Enable the park brake cable automatic adjuster.
14. Adjust the park brake cable.
Intermediate
Park Brake Cable Replacement-Intermediate
Removal Procedure
1. Release the park brake.
2. Disable the park brake cable automatic Adjuster.
3. Raise and support the vehicle. Refer to Vehicle lifting.
4. For passenger and cargo vehicles, disconnect the intermediate cable from the front and rear park brake cables.
