Savana 3/4 Ton Van AWD V8-5.3L VIN T (2003)
8. Reposition the heater inlet hose clamp at the water pump.
9. Remove the heater inlet hose from the water pump.
10. Remove the accessory drive belt tensioner bolts and tensioner from the engine.
11. Remove the water pump bolts.
12. Remove the water pump and gaskets.
13. Discard the water pump gaskets.
Installation Procedure
Important: All gaskets surfaces are to be free of oil or other foreign material during assembly.
1. Install the water pump and NEW gaskets.
Notice: Refer to Fastener Notice in Service Precautions.