Savana 3/4 Ton Van AWD V8-5.3L VIN T (2003)
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the camshaft retainer and bolts.
-
Tighten the camshaft retainer bolts to 25 Nm (18 ft. lbs.).
6. Install the camshaft sprocket and position the timing chain.
7. Install the camshaft sprocket bolts.
-
Tighten the bolts to 35 Nm (26 ft. lbs.).
8. Inspect the camshaft sensor O-ring seal. If the O-ring seal is not cut or damaged, it may be reused.
9. Lubricate the O-ring seal with clean engine oil.
10. Install the camshaft sensor and bolt.
-
Tighten the camshaft sensor bolt to 25 Nm (18 ft. lbs.).
11. Install the valve lifters.
12. Install the front cover.
13. Install the radiator support.