Crankshaft Seal Retainer Service | Savana Van (2003)
3. Install the crankshaft front oil seal onto the J 41478 guide.
4. Install the J 41478 threaded rod (with nut, washer, guide, and oil seal) into the end of the crankshaft.
5. Use the J 41478 in order to install the oil seal into the cover bore.
5.1.
Use a wrench and hold the hex on the installer bolt.
5.2.
Use a second wrench and rotate the installer nut clockwise until the seal bottoms in the cover bore.
5.3.
Remove the J 41478.
5.4.
Inspect the oil seal for proper installation. The oil seal should be installed evenly and completely into the front cover bore.
6. Install the crankshaft balancer.