Savana 3/4 Ton Van AWD V8-5.3L VIN T (2003)
7. Install the accelerator control cable bracket (2) to the intake manifold.
8. Install the accelerator control cable bracket bolts (1).
-
Tighten the accelerator control cable bracket bolts to 10 Nm (89 inch lbs.).
Important: Lightly coat the MAP sensor seal with clean engine oil before installing.
9. Install the MAP sensor (1) to the intake manifold.
10. Install the PCV hose (with valve).
11. If equipped, position a new EGR pipe gasket on the exhaust manifold.
12. If equipped, install the EGR pipe (with valve).