Savana 3/4 Ton Van AWD V8-5.3L VIN T (2003)
3. Remove the auxiliary mode actuator.
INSTALLATION PROCEDURE
1. Install the auxiliary mode actuator.
2. Install the retaining screws to the auxiliary mode actuator.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the screws to 1.9 N.m (17 lb in).
3. Install the heater assembly.
Mode Actuator Replacement - Lower
MODE ACTUATOR REPLACEMENT - LOWER
REMOVAL PROCEDURE
1. Remove the IP carrier.
2. Release the tabs from the lower mode actuator.