Savana 3/4 Ton Van AWD V8-5.3L VIN T (2003)
Control Assembly: Service and Repair
HVAC System - Automatic
Rear Auxiliary
HVAC CONTROL ASSEMBLY REPLACEMENT - REAR AUXILIARY
REMOVAL PROCEDURE
1. Remove the HVAC control assembly bezel (3) from the headliner (2).
2. Lower the front headliner to access the rear of the HVAC control assembly (1). Refer to Headliner Replacement - Front in Interior Trim.
3. Disconnect the electrical connectors.
4. Remove the HVAC control assembly from the front headliner.
INSTALLATION PROCEDURE
1. Install the HVAC control assembly (1) in the front headliner and attach the bezel (3).
2. Connect the electrical connectors.
3. Install the front headliner (2).
Front Auxiliary
HVAC CONTROL ASSEMBLY REPLACEMENT - FRONT AUXILIARY
REMOVAL PROCEDURE
