Savana 3/4 Ton Van AWD V8-53L VIN T (2003) Center Mounted Brake Lamp Repair
1. Remove the upper quarter panel applique.
2. Remove the center high mounted stoplamp lens.
3. Remove the nuts that retain the center high mounted stoplamp applique to the body.
4. Remove the screws that retain the center high mounted stoplamp applique to the body.
5. Remove the center high mounted stoplamp applique from the vehicle.
INSTALLATION PROCEDURE
1. Install the center high mounted stoplamp applique to the vehicle.
2. Install the center high mounted stoplamp applique retaining screws to the body.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the screws that retain the center high mounted stoplamp applique to 2 N.m (18 lb in).
3. Install the center high mounted stoplamp applique retaining nuts to the body.
Tighten
Tighten the nuts that retain the center high mounted stoplamp applique to 6 N.m (53 lb ft).
4. Install the center high mounted stoplamp lens.