Savana 3/4 Ton Van AWD V8-5.3L VIN T (2003)
Underhood Lamp: Service and Repair
UNDERHOOD LAMP REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the electrical connector (3) from the underhood lamp (1).
2. Release the retaining clip (2).
3. Remove the underhood lamp (1).
INSTALLATION PROCEDURE
1. Install the underhood lamp (1).
2. Install the electrical connector cord into the retaining clip (2) and close to retain the cord.
3. Connect the electrical connector (3) to the underhood lamp (1).