Savana 3/4 Ton Van AWD V8-5.3L VIN T (2003)
4. Connect the power steering cooler hose to the power steering pump.
5. Bleed the power steering system.
6. Remove the drain pan from under the vehicle.
With RPO Code GT5
Power Steering Cooler Pipe/Hose Replacement (GT5)
Removal Procedure
Notice: Refer to Power Steering Hose Disconnected Notice in Service Precautions.
1. Install drain pan under the vehicle.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Disconnect the power steering cooler hose from the power steering pump.
4. Disconnect the power steering cooler hose from the power steering gear.
5. Cap the power steering pipes and cooler ends in order to prevent the entry of dirt.
6. Remove the power steering cooler mounting nuts.
7. Remove the power steering cooler from the vehicle.
Installation Procedure
1. Install the power steering cooler to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.