Savana 3/4 Ton Van AWD V8-5.3L VIN T (2003)
5. Install the wheel speed sensor to the wheel hub and bearing.
6. Install the wheel speed sensor mounting bolt to the wheel hub and bearing.
-
Tighten the sensor mounting bolt to 18 Nm (13 lb ft).
7. Install the wheel driveshaft retaining nut and washer.
-
Tighten the nut to 240 Nm (177 lb ft).
8. Install the front axle hub cap.
9. Install the rotor.
10. Install the tire and wheel.
11. Lower the vehicle.