Savana 3/4 Ton Van AWD V8-5.3L VIN T (2003)
7. Completely loosen the junction block caged bolts (2).
8. Release the tabs that retain the junction block (1) to the junction block base.
9. Remove the junction block (1) from the block base.
10. Remove the junction block base nuts (1, 3).
11. Remove the wiring harness (4) from the junction block base (2).
12. Remove the junction block base (4) from the floor.
INSTALLATION PROCEDURE
1. Install the wiring harness (2) to the junction block base (3).