gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Clockspring Assembly / Spiral Cable, Air Bag|Diagrams|Page 8071 > < Clockspring Assembly / Spiral Cable, Air Bag|Diagrams|Page 8069
Page 1
background image

Clockspring Assembly / Spiral Cable: Service and Repair

INFLATABLE RESTRAINT STEERING WHEEL MODULE COIL REPLACEMENT

REMOVAL PROCEDURE

1. Disable the SIR System. Refer to SIR Disabling and Enabling Zone 3.

CAUTION:  Refer to SIR Caution in Service Precautions.

2. Remove the inflatable restraint steering wheel module.
3. Remove the steering wheel nut.
4. Note the mark on the steering shaft and the steering wheel to ensure proper alignment during installation.
5. Remove the steering wheel from the steering shaft.

6. On vehicles with a tilt column, pull the tilt lever straight out from the steering column.
7. Remove the tilt lever assembly.

8. Remove 2 TORX(r) head screws (1) from the lower shroud (2).
9. Remove the lower shroud (2).

Clockspring Assembly / Spiral Cable, Air Bag|Diagrams|Page 8071 > < Clockspring Assembly / Spiral Cable, Air Bag|Diagrams|Page 8069