Savana 3/4 Ton Van AWD V8-5.3L VIN T (2003)
Crankshaft Position Sensor (CKP)
5. Clean the area around the CKP sensor before removal in order to avoid debris from entering the engine.
6. Remove the CKP sensor retaining fastener.
7. Remove the CKP sensor.
INSTALLATION PROCEDURE
1. Install the CKP sensor.
NOTE: Refer to Fastener Notice in Service Precautions.
Crankshaft Position Sensor (CKP)
2. Install the CKP sensor retaining fastener.
Tighten
Tighten the fastener to 25 N.m (18 lb ft).