Savana 3/4 Ton Van AWD V8-5.3L VIN T (2003)
Center Link: Service and Repair
Relay Rod Replacement
Tools Required
-
J24319-B Steering Linkage and Tie Rod Puller
-
J43631 Ball Joint Remover
-
J34028 Inner Tie Rod Wrench
Removal Procedure
1. Raise and suitable support the vehicle. Refer to Vehicle Lifting.
2. Loosen the inner tie rods to relay rod retaining nuts using J34028.
3. Remove the inner tie rods to the relay rod retaining nuts.
4. Rotate the steering linkage to remove the inner tie rods from the relay rod.
