Savana 3/4 Ton Van AWD V8-5.3L VIN T (2003)
8. Disconnect the relay rod from the pitman arm using the J24319-B.
9. Remove the relay rod from the vehicle.
Installation Procedure
1. Install the relay rod to the vehicle.
2. Install the relay rod to the pitman arm and idler arm.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the new relay rod to the idler arm retaining nut.
Tighten the nut to 63 Nm (47 ft. lbs.).
4. Install the new relay rod to the pitman arm retaining nut.
Tighten the nut to 63 Nm (47 ft. lbs.).