Savana 3/4 Ton Van AWD V8-5.3L VIN T (2003)
6. Using a bent-tip screwdriver, pull on one of the open ends of the retaining ring in order to rotate the retaining ring around the quick connect fitting
until the retaining ring is out of position and can be completely removed.
7. Remove the retaining ring from the quick connect fitting.
8. Discard the retaining ring.
9. Pull the cooler line straight out from the quick connect fitting.
10. Remove the retaining ring (E-clips) securing the cooler line to the quick connect in order to remove the remaining cooler lines from the remaining
quick connect fittings.
11. Remove the cooler lines from the retaining clip at the oil pan.
12. Remove the cooler lines from the vehicle.
Installation Procedure
