Savana 3/4 Ton Van AWD V8-5.3L VIN T (2003)
5. Install the shift cable to the transmission bracket.
6. Install the cable clip.
7. Install the shift cable end to the transmission shift control lever by pushing the cable end onto the transmission shift control lever stud ball.
8. Lock the primary lock.
9. Lock the secondary lock.
10. Install the shift cable clips to the engine brackets.
11. Lower the vehicle.
12. Install the rubber grommet to the floor panel.
Important: Ensure the shift lever is in the Park position.
13. Install the shift cable to the steering column shift control.
14. Install the clip securing the shift cable to the steering column bracket.