Savana 3/4 Ton Van AWD V8-5.3L VIN T (2003)
Important:
^
The flywheel does not use a locating pin for alignment and will not initially seat against the crankshaft flange or spacer (if applicable), but will be
pulled onto the crankshaft by the engine flywheel bolts. This procedure requires a three stage tightening process.
^
Certain applications (4.8 L manual transmissions or all 6.0 L) require a spacer and longer bolts for proper flywheel position.
1. Install the spacer (if applicable) onto the rear of the crankshaft.
2. Install the automatic transmission engine flywheel to the crankshaft.
Important: Longer flywheel bolts must be used on applications using a flywheel spacer.
3. Apply threadlock GM P/N 12345382, (Canadian P/N 10953489), or equivalent to the threads of the flywheel bolts.
Notice: Refer to Fastener Notice in Service Precautions.
