Savana 3500 V8-4.8L (2009)
Cowl Moulding / Trim: Service and Repair
Air Inlet Grille Panel Replacement
Removal Procedure
1. Raise and support the hood.
2. Remove the screws (1-7), retaining the air inlet grille panels to the cowl vent.
3. Remove the wiper arms from the vehicle. Refer to Windshield Wiper Arm Replacement (See: Wiper and Washer Systems/Wiper Arm/Service
and Repair).
4. Disconnect the washer hoses from the air inlet grille panel.
5. Remove the air inlet grille panels from the vehicle.
Installation Procedure
