Savana 3500 V8-4.8L (2009)
Radiator Support: Description and Operation
Radiator Support Description
The radiator support assembly is made of a composite material (SMC) to reduce weight and simplify installation procedures. The radiator support bolts
on and is positioned by tabs which are located into holes in the front-end lower tie bar.
A steel reinforcement extends across the upper portion. This reinforcement (3) is part of the assembly or available separately. It is attached to the radiator
support by 14 rivets. Replacement rivets are available.
Lower Tie-Bar
The lower tie bar (1) is serviced as a separate assembly and includes the radiator support body mount reinforcements. It is replaced at the factory seams
and is plug welded to the front fender braces (2). The lower tie-bar is bolted through the body mounts and onto the frame. The body mount bolts are
torqued to 85 Nm (63 lb ft).
Lower Tie-Bar Fender Brace
The fender braces (2) are available for the left and right sides, and serviced as separate components. The fender braces attach the front inner fender panel
to the lower radiator support tie-bar with factory spot welds.
