Savana 3500 V8-4.8L (2009)
11. Remove the radiator (2).
12. Remove the radiator insulators (1, 3).
13. Inspect the following components:
*
The radiator
*
The insulators
*
The hoses and clamps
*
The mounting hardware
Replace the components as necessary.
Installation Procedure
1. Install the radiator insulators (1, 3).
2. Install the radiator (2).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the fan shroud bolts (1) to the top of the radiator support and tighten to 6 Nm (53 lb in).
4. Install the fan shroud bolts (3) to the sides of the fan shroud and tighten to 6 Nm (53 lb in).
5. Install the engine oil cooler lines. Refer to Engine Oil Cooler Pipe/Hose Quick Connect Fitting Replacement (See: Engine/Engine Lubrication/Oil
Cooler/Service and Repair/Engine Oil Cooler Pipe/Hose Quick Connect Fitting Replacement).
6. Install the automatic transmission oil cooler lines. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and
Connection (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Fluid Line/Hose/Service and Repair) for the
4L60-E/4L65-E/4L70-E transmission or Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection (See:
Transmission and Drivetrain/Automatic Transmission/Transaxle/Fluid Line/Hose/Service and Repair) for the 4L80-E/4L85-E transmission.