Savana 3500 V8-4.8L (2009)
Note: If camshaft replacement is required, the valve lifters must also be replaced.
1. Lubricate the camshaft journals and the bearings with clean engine oil.
2. Using the bolt as a handle, carefully install the camshaft into the engine block.
3. Remove the bolt from the front of the camshaft.
Note: Install the retainer with the sealing gasket facing the engine block.
The gasket surface on the engine block should be clean and free of dirt and/or debris.
4. Install the camshaft retainer (203) and bolts (204).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
5. Tighten the camshaft retainer bolts.
