Savana 3500 V8-4.8L (2009)
Warning: Refer to Camshaft Position Actuator Removal and Installation Warning (See: Powertrain Management/Computers and Control
Systems/Camshaft Position Sensor/Service Precautions).
3. Remove the CMP actuator solenoid valve (234).
4. Discard the solenoid valve.
Installation Procedure
1. Install a NEW CMP actuator solenoid valve (234).
With the CMP actuator properly positioned onto the camshaft, the CMP actuator solenoid valve can be threaded completely into the camshaft
using light hand pressure. Tighten by hand until snug.
