gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Exhaust System|Service and Repair|Page 2288 > < Exhaust Heat Shield Replacement - Body Panel|Page 2284
Page 1
background image

Muffler: Service and Repair

Exhaust Muffler Replacement (4.3L/4.8L/5.3L/6.0L)

Removal Procedure
Warning:
  Refer to Protective Goggles and Glove Warning   (See: Service Precautions/Technician Safety Information/Protective Goggles and Glove
Warning).
Warning:
  Refer to Exhaust Service Warning   (See: Service Precautions).

Note:  The muffler is serviced as one complete unit with an exhaust pipe and tail pipe. Some variations of vehicles may have an aftermarket tail pipe
added. When the vehicle is raised on the hoist it must be raised by the frame to allow the rear axle to be lowered.

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle   (See: Maintenance/Vehicle Lifting/Service and Repair).

2. If equipped with 4.3L engine with a single catalytic converter pipe, remove the nuts retaining the catalytic converter pipe from the muffler flange.

Exhaust System|Service and Repair|Page 2288 > < Exhaust Heat Shield Replacement - Body Panel|Page 2284