Savana 3500 V8-4.8L (2009)
3. If equipped with a 4.8L/5.3L/6.0L engine with dual catalytic converter pipes, loosen the clamp for the right catalytic converter.
4. Remove the nuts retaining the left catalytic converter to the muffler flange.
Note: Depending on the wheel base of the vehicle and the length of the exhaust system the following procedures are required in order to remove
the muffler assembly from the vehicle.
5. Remove the muffler assembly hanger pins from the exhaust hanger insulators. Due to the weight of the exhaust system it may take 2 people.
6. Remove the muffler assembly by lifting over the rear axle and remove towards the front of the vehicle.
Installation Procedure
1. Install the muffler assembly from the front of the vehicle by lifting over the rear axle. Due to the weight of the exhaust system it may take 2 people.
2. Install the muffler assembly hanger pins to the exhaust hanger insulators.
