Savana 3500 V8-4.8L (2009)
8. Remove the outside air temperature bracket bolt (1).
9. Remove the bracket.
10. Remove the sealing washers from the hoses.
11. Remove the condenser retaining bolts (3).
12. Remove the condenser (2).
13. Cap off the condenser fittings.
Installation Procedure
1. If replacing condenser, add the specified amount of PAG oil directly into the condenser. Refer to Refrigerant System Capacities (See:
Specifications/Capacity Specifications).
2. Remove the plugs from the condenser fittings.
3. Install new sealing washers. Refer to Sealing Washer Replacement (See: Coupler HVAC/A/C Coupler O-ring/Service and Repair/Sealing Washer
Replacement).
