Savana 3500 V8-4.8L (2009)
1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging (See: Heating and Air Conditioning/Service and Repair/Refrigerant
Recovery and Recharging).
2. Remove the coolant recovery reservoir. Refer to Coolant Recovery Reservoir Replacement (See: Engine, Cooling and Exhaust/Cooling
System/Coolant Reservoir/Service and Repair).
3. Remove the grille. Refer to Grille Replacement (Base) (See: Body and Frame/Grille/Service and Repair)Grille Replacement (Uplevel) (See:
Body and Frame/Grille/Service and Repair).
4. Remove the discharge line nut (2) from the condenser.
5. Remove the discharge line bolt from the compressor.
6. Remove the discharge line from the vehicle.
Installation Procedure
1. Install the discharge hose into the vehicle.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the discharge hose nut (2) to the condenser and tighten to16 Nm (12 lb ft).
