Savana 3500 V8-4.8L (2009)
Power Steering Line/Hose: Service and Repair
Power Steering Cooler Pipe/Hose Replacement (GT4)
Power Steering Cooler Pipe/Hose Replacement (GT4)
Removal Procedure
Caution: Refer to Power Steering Hose Disconnected Caution (See: Service Precautions).
1. Install drain pan under the vehicle.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Vehicle Lifting/Service and Repair).
3. Disconnect the power steering cooler hose from the power steering pump.
4. Disconnect the power steering cooler hose from the power steering gear.
5. Cap the power steering cooler ends in order to prevent the entry of dirt.
6. Remove the power steering cooler mounting bolts.
7. Remove the power steering cooler from the vehicle.
Installation Procedure