Savana 3500 V8-4.8L (2009)
7. Wrap electrical tape around the connection as shown.
8. Route the engine coolant heater cord and extension cord behind the alternator and adjacent to the engine coolant crossover pipe as shown.
9. Continue to route the extension cord to the exit location desired by the customer as shown.
10. Review the routing of the coolant heater cord and extension cord to verify that it does not touch any sharp edges that could damage it.
11. Secure the engine coolant heater cord and the extension cord with tie straps as needed.
12. Resecure any of the original clips that retained the engine coolant heater cord to the vehicle that were released to provide length.
Part Information
The extension cord may be obtained at any of the following outlets:
-
Lowes*
-
Home Depot*
-
Canada: Acklands-Grainger* (www.acklandsgrainger.com), Catalogue Part Number: CWRSJTOW3C14-10
USA: Cords should bear the UL symbol.
Canada: Cords should bear the ULc symbol or CSA approval.
*We believe these sources and their products to be reliable. There may be additional manufacturers of such products/materials. General Motors does not
endorse, indicate any preference for, or assume any responsibility for the products or material from these firms or for any such items that may be
available from other sources.
