Savana 3500 V8-4.8L (2009)
Important: Ensure that the tape tab is pointing away from the battery prior to installation.
1. Slide the NEW battery current sensor (1) up onto the negative battery cable.
2. Using NEW tie straps and electrical tape, attach the battery current sensor to the negative battery cable.
3. Install the negative battery cable. Refer to Battery Negative Cable Replacement (With LMM Primary) (See: Starting and
Charging/Battery/Battery Cable/Negative/Service and Repair)Battery Negative Cable Replacement (With LMM Auxiliary) (See: Starting and
Charging/Battery/Battery Cable/Negative/Service and Repair)Battery Negative Cable Replacement (With LY2, LMF or LY6) (See: Starting and
Charging/Battery/Battery Cable/Negative/Service and Repair)Battery Negative Cable Replacement (With LU3 and RVS) (See: Starting and
Charging/Battery/Battery Cable/Negative/Service and Repair).
4. Connect the I/P harness electrical connector (1) to the battery current sensor.