Savana 3500 V8-4.8L (2009)
3. Connect the CKP sensor electrical connector.
Access To CKP Sensor
4. Install the starter. Refer to Starter Replacement (V6) (See: Starting and Charging/Starting System/Starter Motor/Service and Repair)Starter
Replacement (4.8L/5.3L/6.0L) (See: Starting and Charging/Starting System/Starter Motor/Service and Repair)Starter Replacement (6.6L) (See:
Starting and Charging/Starting System/Starter Motor/Service and Repair).
5. Lower the vehicle.
6. Connect the negative battery cable.
7. Perform the CKP system variation learn procedure. Refer to Crankshaft Position System Variation Learn (See: ).
