Savana 3500 V8-4.8L (2009)
View of the release tool being used for the smaller terminals.
7. While holding the removal tool in place, gently pull the wire out of the back of the connector. Always remember never use force when pulling a
terminal out of a connector.
Repair Procedure
Use the appropriate terminal and follow the instructions in the J-38125 .
Location of the terminal in the repair tray and the proper crimp tool can be found in the appropriate connector end view.
Tyco/AMP Connectors (102-Way Inline)
Tyco/AMP Connectors (102-Way Inline)
Special Tools
J-38125 Terminal Repair Kit
Removal Procedure
View of a typical connector in the assembled position.
