Savana 3500 V8-4.8L (2009)
4. Remove the solenoid retainer bolt (364A) and the solenoid retainer (378).
5. Remove the pressure control solenoid (377).
Note the orientation upon removal.
6. Remove the 1-2 and 2-3 shift solenoid retainers.
7. Remove the 1-2 and 2-3 shift solenoids.
Installation Procedure
Caution: Be sure all solenoids are installed with the electrical connectors facing the non-machined (cast) side of the valve body; otherwise, the
solenoids will bind against the transmission case as the valve body bolts are tightened and damage may occur.
1. Install the 1-2 and 2-3 shift solenoids.
2. Install the 1-2 and 2-3 shift solenoid retainers.
