Savana 3500 V8-4.8L (2009)
Caution: Be sure all solenoids are installed with the electrical connectors facing the non-machined (cast) side of the valve body; otherwise, the
solenoids will bind against the transmission case as the valve body bolts are tightened and damage may occur.
4. Install the following items:
1. The actuator feed limit valve (374)
2. The actuator feed limit valve spring (375)
3. The bore plug (376)
4. The bore plug retainer (395)
5. The pressure control solenoid (377)
6. The solenoid retainer (378)
7. The solenoid retainer bolt (364)
Tighten the solenoid retainer bolt to 11 Nm (97 lb in)
5. Install the TCC PWM solenoid to the control valve body.
6. Install the TCC PWM solenoid retainer.
