Savana 3500 V8-4.8L (2009)
*
Melco(R) (square design) coil mounting bracket (1).
*
Delphi(R) (round design) coil mounting bracket (2).
Installation Procedure
1. Install the spark plug wires at the ignition coil.
2. Install the spark plug wire to each spark plug.
3. Inspect the wires for proper installation:
*
Push sideways on each boot in order to inspect the seating.
*
Reinstall any loose boot.
4. Install the engine cover. Refer to Engine Cover Replacement (See: Body and Frame/Access Cover/Service and Repair).
