gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Inflatable Restraint Front End Sensor Replacement|Page 713 > < Inflatable Restraint Front End Sensor Replacement|Page 711
Page 2
background image

3. Install the inflatable restraint front end sensor (1) into the keyhole slot in lower radiator support (2). 

Caution:  Refer to Fastener Caution   (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).

4. Push the sensor towards the rear of the vehicle to seat the sensor in the keyhole slot in the lower radiator support (2). Tighten the nut (1) to 10 Nm

(89 lb in).

5. Connect the inflatable restraint front end sensor electrical connector.
6. Install the CPA to the electrical connector.
7. Remove the safety stands and lower the vehicle.
8. Enable the SIR system. Refer to SIR Disabling and Enabling   (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air

Bag(s) Arming and Disarming/Service and Repair).

Inflatable Restraint Side Impact Sensor Replacement - Left Side Rear

Inflatable Restraint Side Impact Sensor Replacement - Left Side Rear

Inflatable Restraint Front End Sensor Replacement|Page 713 > < Inflatable Restraint Front End Sensor Replacement|Page 711