Savana 3500 V8-4.8L (2009)
Tie Rod: Service and Repair
Steering Linkage (Non-Rack & Pinion)
Steering Linkage Inner Tie Rod Replacement
Special Tools
J 34028 Inner Tie Rod Wrench
Removal Procedure
1. Raise and suitable support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Wheels and Tires/Vehicle Lifting/Service and Repair).
2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
3. Remove the outer tie rod. Refer to Steering Linkage Outer Tie Rod Replacement (See: Steering Linkage Outer Tie Rod Replacement).
4. Loosen the inner tie rod to relay rod retaining nut using J 34028 .
5. Remove the inner tie rod to the relay rod retaining nut. Discard old nut.
6. Remove the inner tie rod from the vehicle
7. Inspect the shaft for bent or damaged threads.
8. Clean the tapered surface of the steering knuckle.
Installation Procedure