Savana 3500 V8-4.8L (2009)
Shift Cable: Adjustments
4L60-E/4L65-E/4L70-E - Automatic Transmission
Range Selector Lever Cable Adjustment
1. Position the transmission shift control lever into park.
2. Apply the park brake.
3. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
4. Remove the end of the range selector cable from the range selector lever ball stud.
5. Position the transmission range selector lever to park. Rotate the range select lever clockwise until it reaches the full mechanical stop position.
6. Slide the locking tab retainer to the side.
7. Release the locking tab.
8. Install the end of the range selector cable to the range selector lever ball stud.
9. Engage the locking tab without disturbing the cable. This sets the adjustment.
10. Slide the locking tab retainer over the locking tab.
11. Lower the vehicle.
12. Check the transmission for proper operation.
13. Release the parking brake.
