Savana 3500 V8-4.8L (2009)
Valve Body: Locations
4L80-E/4L85-E - Automatic Transmission
Disassembled Views
Case and Associated Parts (1 of 3)
1 - Torque Converter Assembly
2 - Turbine Shaft Front Oil Seal Ring
3 - A/Trans O/Pump Bolt and Seal Assembly
4 - A/Trans Oil Pump Assembly
5 - A/Trans Oil Pump Seal
6 - A/Trans Oil Pump Gasket
7 - A/Trans Case Assembly
8 - Transmission Front Fluid Cooler Pipe Connector
9 - Vent Pipe
10 - Nameplate Pin
11 - A/Trans Name Plate
12 - Orifice Lube Oil - 2WD Plug Case - 4WD
13 - Output Shaft Seal
14 - Output Shaft Seal Retainer Ring
15 - Case Extension Seal
16 - Bearing Retainer Ring
17 - Ball Bearing Assembly
18 - Bearing Spacer
19 - Case Extension Assembly
20 - Prop Shaft Front Slip Yoke Oil Seal Assembly
21 - Case Extension Bolt
22 - A/T Input Speed and 2WD Output Speed Sensor Assembly (4WD Plug)
23 - Input Speed and Output Speed Sensor Bolt
24 - Line Pressure Test Hole Plug
77 - Prop Shaft Front Slip Yoke Bushing
78 - Output Shaft Bushing
79 - Direct Oil Gal - 0.25 Diameter Cup Plug
80 - Manual 2-1 Band Anchor Pin
81 - Low and Reverse Band Anchor Pin
89 - Transmission Fluid Cooler Pipe Retainer (Some Models)
90 - Transmission Rear Fluid Cooler Pipe Fitting
91 - Transmission Fluid Cooler Pipe Fitting Seal - (Aluminum Fittings Only)
Case and Associated Parts (2 of 3)