Savana 3500 V8-4.8L (2009)
Valve Body: Service and Repair
4L80-E/4L85-E - Automatic Transmission
Valve Body and Pressure Switch Replacement
Special Tools
*
J 25025 Guide Pins
*
J 36850 Transjel(R)
Removal Procedure
1. Ensure that removal of the valve body is necessary before proceeding.
Note: The following components can be serviced without removing the valve body from the transmission:
*
The 2-3 solenoid (1)
*
The internal wiring harness (2)
*
The 1-2 shift solenoid (3)
*
The transmission fluid temperature sensor (4)
*
The transmission fluid pressure manual valve position switch (5)
*
The pressure control solenoid (6)
*
The torque converter clutch pulse width modulation (TCC PWM) solenoid (7)
2. Remove the fluid level indicator.
3. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
4. Remove the oil pan, gasket, and filter. Refer to Automatic Transmission Fluid and Filter Replacement (See: Service and Repair/Removal and
Replacement).
