Savana 3500 V8-4.8L (2009)
17. Remove the spacer plate to case gasket (2) from the case. The gasket may stick to the spacer plate.
18. Remove the PWM screen (1) from the case passage.
19. Remove the manual 2-1 band servo assembly (1).
20. Remove the servo piston cushion spring (2).
21. Remove the manual 2-1 band servo piston pin retainer ring (4).
22. Remove the manual 2-1 band servo piston pin (1).
23. Remove the manual 2-1 band servo piston seal (2).
Note: Do not use a magnet in order to remove the checkballs. Using a magnet to remove the checkballs may magnetize the checkballs, causing
metal particles to stick.
